| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Steering | Section: Steering Column | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000XZK01IX |
| Title: STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: CUSTOMIZE PARAMETERS (2008 Sequoia) | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Utility / Customize Setting / Tilt & Telesco.
(e) Select the setting by referring to the table below.
Tilt & Telescopic
|
Tester Display |
Default |
Content |
Setting |
|---|---|---|---|
|
Autoaway/Return function |
ON |
ON/OFF of the auto away/return function |
ON/OFF |
|
|